Working with Devices

HS-MS100+ Motion Sensor

HomeSeer HS-MS100+ is a Z-Wave motion sensor that may be used to trigger automation events (“automations”) when motion is sensor and then again when motion has not been sensed for a period of time. 

Typical Usage

  • Control Lighting
  • Track Occupany

Including into a HomeSeer System

Using Z-Tool+ Mobile App

  1. Tap the green “Add Device” button and wait for the “Activate…” prompt.
  2. Remove the back cover from the sensor, then press and release the Z-Wave network button once. This will initiate the inclusion process. 
  3. When inclusion has finished, a new screen will pop open. Name the sensor and assign it to a Floor and Room
    Example: First Floor – Kitchen – Motion Sensor
  4. Click the “Done” button and close Z-Tool+

Excluding From a HomeSeer System

Using Z-Tool+ Mobile App

  1. Tap the red “Remove Device” button and wait for the “Activate…” prompt.
  2. Remove the back cover from the sensor, then press and release the Z-Wave network button once. This will initiate the exclusion process. 
  3. When exclusion is finished, the “Add Device” and “Remove Device” buttons will glow green and red again. Close Z-Tool+