HomeSeer Sensors

Our sensors combine innovation and performance at a very affordable price. We believe they offer the best value available today! All sensors feature Z-Wave Plus technology and S2 encryption for the highest level of performance and security.

HS-FS100-W Perimeter Water Sensor

HS-FS100-W is a water sensor that’s designed to detect leaks with a special fluid sensing cable. It will send Z-Wave commands when water is detected and when water has not been detected for some time.

Main Features

  • Water Sensor
  • Temperature Sensor
  • Z-Wave Controllable Buzzer

Most water sensors (including our HS-LS100+) can only sense fluid in one small spot. HS-FS100-W is designed to check for leaks over a much larger area. Wrap the included 4 ft cable around your water heater or string several cables together to monitor a wall or room.

  • Wrap around the base of a hot water heater, washing machine, toilet or other appliance for leak detection in all directions
  • Add extension cables and install along walls to detect leaks at any point
  • UPC: 757347266483
  • Power: Requires 3 AAA batteries or micro USB adapter (not supplied)
  • US Z-Wave Operation
  • Z-Wave Plus Certified

HS-FS100-L Indicator Light Sensor

HS-FS100-L is a sensor designed to monitor indicator lights on appliances and other equipment in your home. It will send Z-Wave commands to your smart home system when things turn on, turn off or change their status.

Main Features

  • Indicator Light Sensor
  • Temperature Sensor
  • Z-Wave Controllable Buzzer
  • Acts as a Z-Wave repeater when used on line power

Think of all the things in your home that have indicator lights. Wouldn’t it be great if you could keep track of them even when you’re not at home? Now you can! Our new indicator light sensor monitors these lights and reports changes back to your smart home system or hub.

Receive notifications when a…

  • Dehumidifier needs to be emptied
  • Humidifier needs to be filled
  • Water softener needs more salt
  • Washing machine turns off
  • Dryer/Washer turns off
  • Computer or network equipment needs attention
  • Home entertainment gear turns on or off
  • Security panel lights come on
  • Heating or cooling equipment need attention
  • The freezer has stopped working, IE: unplugged
  • Air filter needs replacing
  • UPC: 757347266476
  • Power: Requires 3 AAA batteries or micro USB adapter (not supplied)
  • US Z-Wave Operation
  • Z-Wave Plus Certified

HS-FLS100+ Floodlight Sensor

HS-FLS100+ is a Z-Wave-connected outdoor motion (PIR) and light (LUX) sensor that’s designed to work with standard floodlight fixtures. It will sends Z-Wave commands when motion is sensed and when motion has not been sensed for a period of time. It will also send LUX information via Z-Wave commands.

In “Conventional” mode, HS-FLS100+ will automatically turn on floodlights (directly) when motion is sensed and LUX level is low. In “Smart” mode, HS-FLS100+ sends motion and LUX data to your controller and responds to Z-Wave commands to turns lights on and off.

Main Features

  • Motion (PIR) sensor
  • Light (LUX) sensor
  • Floodlight power control (up to 300 watts)
  • Controller-adjustable motion timeout and light sensitivity
  • Fits most standard floodlight mounting brackets
  • Easy replacement for non-Z-Wave sensors

HS-FLS100+ is an outdoor MOTION and LUX sensor that may be used in a variety of ways:

  • Automatically turns on floodlights when motion is sensed and it’s dark (Conventional Mode).
  • Turns floodlights on or off when it receives Z-Wave commands from controller (Smart Mode).
  • Sends Z-Wave commands when motion is sensed or has not been sensed for a period of time.
  • Sends LUX information to controller using Z-Wave commands.

HS-FLS100+ can be used as a retrofit sensor replacement for most motion-activated floodlight fixtures. The motion timeout interval and LUX sensitivity are adjustable via Z-Wave commands.

  • UPC: 757347266384
  • Power: 120v / 60Hz
  • Maximum Load: 300 watts (incandescent) or 100 watts (LED)
  • PIR Angle of Detection: 120°
  • PIR Max Range: 39 feet (12 meters)
  • LUX Range: 0 – 250
  • 908 MHz Z-Wave frequency
  • ETL, FCC, Z-Wave certified
  • IP44 Rating for outdoor use

HS-DS100+ Door / Window Sensor

Door / window sensors are used to monitor the open/closed status of doors and windows. HS-DS100+ is a wireless Z-Wave door / window sensor that works with most popular home automation smart controllers and hubs. Use it to control other Z-Wave devices (directly) or use it to trigger automation events when doors or windows are opened or closed.

Main Features

  • Door / window sensor
  • Uses conventional AAA batteries for less battery changes
  • Supports Z-Wave Plus Technology
  • Small and Sleek design
  • S2 Security
  • UPC: 610585164556
  • Power: (2) AAA batteries
  • US Z-Wave Operation
  • Z-Wave Plus Certified

HS-MS100+ Motion Sensor

HS-MS100+ may be used to trigger events (“automations”) when motion is sensed. Use this turn on lights, send notifications, sound alarms or change the occupancy status of your home. This motion sensor will send Z-Wave commands when (a) motion is sensed and (b) when motion has not been sensed for a (user-adjustable) period of time.

Main Features

  • Motion sensor
  • Magnetic mount
  • Easy to install
  • Easy to adjust
  • Works with most Z-Wave certified controllers
  • Supports S2 security
  • Works on battery power or line power (adapter not included)
  • UPC: 757347266292
  • 908 MHz Z-Wave frequency
  • Dimensions (main unit): 2″ x 2″ x 1.75″
  • Micro USB port (for line power)
  • Blue LED indicator

HS-LS100+ Leak Sensor

HS-LS100+ may be used to trigger events (“automations”) when water leaks are detected. Use to control water valves, send notifications or sound alarms when water leaks are sensed. This leak sensor will send Z-Wave commands when (a) water is sensed and (b) when water has not been sensed for a (user-adjustable) period of time.

Main Features

  • Leak sensor
  • Designed for free-standing or wall mounted installation
  • Includes optional magnetic wall mount (with probe cable)
  • Works with most Z-Wave certified controllers
  • Supports S2 security
  • UPC: 757347266308
  • 908 MHz Z-Wave frequency
  • Dimensions (main unit): 2.5″ x 2.5″ x 1″
  • LED indicator

HomeSeer HSM200 Multisensor | Indicator Module

Our line powered Z-Wave multisensor detects motion, temperature & light level, can function as a night light and can display up to 7 different glowing colors when things happen in the home!

Main Features

  • Motion, Temperature, and Light sensor
  • Includes multi-colored LEDindicator
  • Line-powered
  • Works as a repeater
  • Never needs batteries
  • Supports Z-Wave Plus Technology
  • Firmware updatable in field by end-consumer
  • UPC: 610585164273
  • Power: 120v, 60Hz
  • US Z-Wave Operation
  • Indicator Colors: Red, Green, Blue, Magenta, Cyan, Yellow, White
  • Z-Wave Plus Certified